Rail Guided Scissor Lift w/ Side Shifting Platform

Large Rail Guided Scissors Lift with Multiple Side Shifting Platforms

This Electric/Hydraulic powered scissors lift is designed to travel on a rail system along the length of a production line. The main deck of the platform is 8’ wide by 16’ long. The entire deck can shift sideways 5’ to cantilever over obstructions. At one end of the main deck there is an auxiliary powered roll-out deck 8’ long by 3’ wide that can shift sideways, from the main deck, an additional 4’. The combination of the main deck and auxiliary side shift deck permits an operator to reach a work area 9’ out from the side of the lift base. The platform has a lowered starting height of 4’-6” and is accessed by a fixed set of stairs on one end of the platform. The stair set, which does not travel up and down with the platform, is separated from the main platform by a set of safety gates. The raised height of the platform is 15’, with 14’ clear under the side shift sections when they are extended out. Operator Controls and emergency stops are located at the base of the lift and on the platform. The platform controls are on a movable panel so they can be placed anywhere on the platform allowing the operator maximum visibility while traveling or deploying the side shifting platforms. Safety signaling devices include both flashing lights and beepers to warm of movement. An egress ladder, (not shown) attached to the lift base allows operators to exit the platform in the event of an emergency. The platform railing has removable sections for access to the product. As an added safety feature harness attachment points are included on the platform.